Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of RADILON DT 22D 1000 NT - PA612 - RadiciGroup High Performance Polymers

Material Data Center offers the following functions for RADILON DT 22D 1000 NT:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Radilon D datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
机械性能 - 热性能 - 电性能 - 其它性能
Any use of this information falls under the rules of our disclaimer.
材料文字说明
PA612 low viscosity. Natural colour.

Suitable for extrusion processes where low viscosity is required, typically monofilament extrusion. Suitable also for injection and rotational moulding operations.
机械性能干 / 已调节单位Test Standard
ISO数据
拉伸模量 2300 / - MPa ISO 527
屈服应力 60 / - MPa ISO 527
屈服伸长率 7 / - % ISO 527
无缺口简支梁冲击强度, +23°C N / - kJ/m² ISO 179/1eU
简支梁缺口冲击强度, +23°C 4.5 / - kJ/m² ISO 179/1eA
热性能干 / 已调节单位Test Standard
ISO数据
熔融温度, 10°C/min 215 / * °C ISO 11357-1/-3
厚度为h时的燃烧性 HB / * class IEC 60695-11-10
测试用试样的厚度 0.8 / * mm -
电性能干 / 已调节单位Test Standard
ISO数据
体积电阻率 1E13 / - Ohm*m IEC 62631-3-1
其它性能干 / 已调节单位Test Standard
吸水性 3 / * % 类似ISO 62
吸湿性 1.2 / * % 类似ISO 62
密度 1060 / - kg/m³ ISO 1183
典型数据
加工方法
注塑, 异型材挤出成型, 其它挤出成型, 旋转成型
供货形式
碎粒料, 自然色
应用
单纤纺丝
地区供应
北美, 欧洲, 亚太, 中南美洲, 中东/非洲
其他信息
注塑成型
该材料用防水包装运输，已经为后续加工准备好。最合适的加工含水量最大值推荐为0.1%。除湿干燥机的典型条件：温度80°C，露点-20°C或更低，时间2-4h或更多。注意避免材料吸水以及添加再粉碎材料时混入其他聚合物的污染。颜色变化及机械性能下降可能会发生，需要仔细监控。

Injection Molding 加工参数
熔融温度模具温度注塑速
230 - 260°C70 - 80°C中


挤出温度
240 - 290°C
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.